What is it?
Using the plastering kit (so-called lath plastering system), we prepare the wall for plastering in a simple way and above all quickly. The plastering kit consists of a system of plaster laths made of tubes. The rails are installed on the wall using screws without dowels. By loosening or tightening the screws we set the required plaster thickness. Fix the selected setting with the locking nut and the plastering can begin.
Where can I use it?
- interior walls
- straight walls
- curved walls
- new buildings
- plastering using machinery
- manual plastering
- creating a right angle
- classic, lime, clay plaster, etc.
And what are the advantages?
Install the kit within 1 hour and you can start with the plastering.
Achieve the professional plane of your plasters.
No rust penetrating walls
The classic metal laths remain under the plaster, it will rust over time and the rust will come out. The offered plaster laths do not stay under the plaster, so this risk is eliminated.
Unlike classic plasters, we use laths repeatedly, the investment returns quickly.
Laths are adjustable. In one installation we prepare a surface of any size.
Usage is very simple; the installation can be done by both a handyman and a professional.
Do you like the product? Order here!
We supply the product in kits or you can assemble your own kit from individual components.
Warning: If you order additional laths, the correct number of screws and levelling nuts must be checked (60 cm lath requires two screws and two levelling nuts, 190 and 100 cm laths need three screws and three levelling nuts). The thickness of the lath together with the levelling nut is 18 mm, the thickness of the lath itself is 10 mm. Using a levelling nut, a plaster thickness of at least 18mm can be achieved; the thickness of the plaster in the range of 10-18mm can be achieved using a suitable washer other than the levelling nut (not included).